|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MD2310FX High voltage NPN Power transistor for standard definition CRT display Features State-of-the-art technology: - diffused collector "enhanced generation" More stable performance versus operating temperature variation Low base drive requirement Tighter hFE range at operating collector current Fully insulated power package u.l. compliant In compliance with the 2002/93/EC european directive ISOWATT218FX 3 1 2 Applications Horizontal deflection output for monitor and real flat tv Internal Schematic Diagram Description The MD2310FX is manufactured using Diffused Collector in Planar Technology adopting new and enhanced high voltage structure. The new MD product series show improved silicon efficiency bringing updated performance to the Horizontal Deflection stage. Order codes Part number MD2310FX Marking MD2310FX Package ISOWATT218FX Packing TUBE September 2006 . Rev 4 1/10 www.st.com 10 1 Electrical ratings MD2310FX 1 Table 1. Symbol VCES VCEO VEBO IC ICM IB PTOT Vinso Tstg TJ Electrical ratings Absolute maximum rating Parameter Collector-emitter voltage (VBE = 0) Collector-emitter voltage (IB = 0) Collector-base voltage (IC = 0) Collector current Collector peak current (tP < 5ms) Base current Total dissipation at Tc = 25C Insulation withstand voltage (RMS) from all three leads to external heatsink Storage temperature Max. operating junction temperature Value 1500 700 9 14 21 7 62 2500 -65 to 150 150 Unit V V V A A A W V C Table 2. Symbol Rthj-case Thermal data Parameter Thermal resistance junction-case ____________________Max Value 2 Unit C/W 2/10 MD2310FX 2 Electrical characteristics 2 Electrical characteristics (TCASE = 25C; unless otherwise specified) Table 3. Symbol ICES IEBO VCEO(sus) VCE(sat) Note 1 VBE(sat) Note 1 hFE Note 1 Electrical characteristics Parameter Collector cut-off current (VBE = 0) Emitter cut-off current (IC = 0) Collector-emitter sustaining voltage (IC = 0) Collector-emitter saturation voltage Base-emitter saturation voltage Test conditions VCE = 1500V VCE = 1500V VEB = 9V IC = 100 mA IC = 7 A IC = 7 A IC = 1 A DC current gain IC = 7 A IC = 7 A INDUCTIVE LOAD Storage time Fall time IC = 6A ___ _ _ IB(on) = 0.9A__ LBB(off) = 1.6H IB = 1.75 A IB = 1.75 A VCE = 5 V VCE = 1 V VCE = 5 V fh = 64KHz VBE(off) = -2.7V 2.3 0.12 2.8 0.25 s s 6 28 5.5 8.5 700 2.5 1.1 Tc= 125C Min. Typ. Max. 0.2 2 1 Unit mA mA mA V V V ts tf 1 Pulsed duration = 300 s, duty cycle 1.5%. 3/10 2 Electrical characteristics MD2310FX 2.1 Typical characteristics Safe operating area Figure 2. Derating curve Figure 1. Figure 3. Output characteristics Figure 4. Reverse biased SOA Figure 5. DC current gain Figure 6. DC current gain 4/10 MD2310FX Figure 7. Collector-emitter saturation voltage Figure 8. 2 Electrical characteristics Base-emitter saturation voltage Figure 9. Power losses Figure 10. Inductive load switching time 5/10 3 Test circuits MD2310FX 3 Test circuits Figure 11. Power losses and inductive load switching test circuit Figure 12. Reverse biased safe operating area test circuit 6/10 MD2310FX 4 Package mechanical data 4 Package mechanical data In order to meet environmental requirements, ST offers these devices in ECOPACK(R) packages. These packages have a Lead-free second level interconnect . The category of second level interconnect is marked on the package and on the inner box label, in compliance with JEDEC Standard JESD97. The maximum ratings related to soldering conditions are also marked on the inner box label. ECOPACK is an ST trademark. ECOPACK specifications are available at: www.st.com 7/10 4 Package mechanical data MD2310FX ISOWATT218FX MECHANICAL DATA DIM. A C D D1 E F F2 G G1 H L L2 L3 L4 L5 L6 L7 N R Dia MIN. 5.30 2.80 3.10 1.80 0.80 0.65 1.80 10.30 15.30 9 22.80 26.30 43.20 4.30 24.30 14.60 1.80 3.80 3.40 mm. TYP MAX. 5.70 3.20 3.50 2.20 1.10 0.95 2.20 11.50 15.70 10.20 23.20 26.70 44.40 4.70 24.70 15 2.20 4.20 3.80 5.45 7627132 B 8/10 MD2310FX 5 Revision history 5 Revision history Table 4. Revision history Date 18-Oct-2005 25-Nov-2005 15-Dec-2005 29-Sep-2006 Revision 1 2 3 4 First release Complete datasheet Legal page inserted New hFE limit Changes 9/10 5 Revision history MD2310FX Please Read Carefully: Information in this document is provided solely in connection with ST products. STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described herein at any time, without notice. All ST products are sold pursuant to ST's terms and conditions of sale. Purchasers are solely responsible for the choice, selection and use of the ST products and services described herein, and ST assumes no liability whatsoever relating to the choice, selection or use of the ST products and services described herein. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. If any part of this document refers to any third party products or services it shall not be deemed a license grant by ST for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoever of such third party products or services or any intellectual property contained therein. UNLESS OTHERWISE SET FORTH IN ST'S TERMS AND CONDITIONS OF SALE ST DISCLAIMS ANY EXPRESS OR IMPLIED WARRANTY WITH RESPECT TO THE USE AND/OR SALE OF ST PRODUCTS INCLUDING WITHOUT LIMITATION IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION), OR INFRINGEMENT OF ANY PATENT, COPYRIGHT OR OTHER INTELLECTUAL PROPERTY RIGHT. UNLESS EXPRESSLY APPROVED IN WRITING BY AN AUTHORIZED ST REPRESENTATIVE, ST PRODUCTS ARE NOT RECOMMENDED, AUTHORIZED OR WARRANTED FOR USE IN MILITARY, AIR CRAFT, SPACE, LIFE SAVING, OR LIFE SUSTAINING APPLICATIONS, NOR IN PRODUCTS OR SYSTEMS WHERE FAILURE OR MALFUNCTION MAY RESULT IN PERSONAL INJURY, DEATH, OR SEVERE PROPERTY OR ENVIRONMENTAL DAMAGE. ST PRODUCTS WHICH ARE NOT SPECIFIED AS "AUTOMOTIVE GRADE" MAY ONLY BE USED IN AUTOMOTIVE APPLICATIONS AT USER'S OWN RISK. Resale of ST products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by ST for the ST product or service described herein and shall not create or extend in any manner whatsoever, any liability of ST. ST and the ST logo are trademarks or registered trademarks of ST in various countries. Information in this document supersedes and replaces all information previously supplied. The ST logo is a registered trademark of STMicroelectronics. All other names are the property of their respective owners. (c) 2006 STMicroelectronics - All rights reserved STMicroelectronics group of companies Australia - Belgium - Brazil - Canada - China - Czech Republic - Finland - France - Germany - Hong Kong - India - Israel - Italy - Japan Malaysia - Malta - Morocco - Singapore - Spain - Sweden - Switzerland - United Kingdom - United States of America www.st.com 10/10 |
Price & Availability of MD2310FX |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |